Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser that works with CAN buses. It is discrete It does not include LED indicators or key fobs, and is concealed in the wiring of the vehicle.
The user may also turn off the system temporarily by using Transport Mode when renting out their vehicle. This guide will guide you through the steps of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car against key cloning attacks, hacking attacks and relay attacks. The system is directly connected to the ECU of your vehicle and secured by a PIN code that you choose. It is not detected by thieves using diagnostic scanners or other modern methods. It isn't able to be disabled with circuit cuts.
The system is simple to use, but professional installation is recommended to ensure a smooth connection to the ECU of your vehicle. A certified installer from Thatcham can assist in the installation and programming of your Ghost system. They can also recommend a tracking or alarm system to complete the protection package for your vehicle.
The first step is to disconnect the battery to prevent accidental airbag deployment or short circuits. When the battery is disconnected, the installer may start working safely. ghost vehicle immobiliser are useful for securing connections with precision, while a multimeter can be used to test the electrical properties and safety. Insulation tape and cable ties are also necessary for securing connections and keeping wiring neat. The Ghost Immobiliser user manual will give specific instructions that are specifically tailored to your specific model.
During the installation process, it's important to choose an area for grounding that is free of any paint or debris. Installers must also ensure that the immobiliser's wires CAN H and CAN L are connected to the correct ECU ports. The wires can be connected or soldered, depending on the model. To ensure a reliable and long-lasting connection it is recommended you choose a top-quality plug.
After the installation is completed Once the installation is completed, the customer can enable after the installation is complete, the customer can activate Transport Mode. This allows mechanics or valet parking to access the vehicle without knowing the pin code. The customer has to press the icon for service on the dashboard five times in 2 seconds. The system will confirm this by showing 5 indicators.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA verified and Thatcham approved. It's an excellent option for those who regularly rents their vehicle on platforms such as Turo. An immobiliser can cut down on insurance rates, as it decreases the likelihood of theft.
Getting Started
ghost immobiliser reviews can't go far wrong with an autowatch ignition device for those who want to safeguard your car from theft. It protects your vehicle from starting even if a criminal steals or copies the key. This is due to its high-tech technology, which is designed to prevent the engine from starting without the correct PIN code is entered.
The device is connected to the vehicle's bus network, CAN and allows direct communication with the ECU. It uses buttons that are already present on the dashboard and wheel to create a unique sequence that only you know, making it impossible for anyone else to start your vehicle. This is the best way to protect your pride and joy. It will not lose its value in the event that you decide to sell it.
Installing a ghost immobiliser is an easy procedure, but it's important to follow the instructions carefully to avoid electrical issues and system malfunctions. First, you must find a 12V power source and a suitable grounding for the car's chassis. After that, you are able to begin to connect the wires to the immobiliser. Use high-quality connectors, and soldering techniques for a solid connection. Also, make sure to cover the connections with heat shrink tubing or insulation tape to shield them from electrical short circuits and other problems.
Once the wires are connected, you can connect the battery and then turn on the engine to test the immobiliser's functionality. After you've confirmed that everything is working properly, you can install the immobiliser in a secure position inside the vehicle. Make sure you hide it in a secure manner to prevent a thief from tampering with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified This means it complies with the highest standards of security and is a great deterrent to car thieves. It is impervious to key cloning and hacking and cannot be disabled without a code. It is also simple to use and can be set into a service valet mode so that your automobile will not be activated when you take it in for servicing or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system designed to stop theft of vehicles. It connects directly to your vehicle's CAN bus network and communicates with the ECU which makes it a virtually undetectable addition to your vehicle. Unlike other aftermarket systems that require the removal of circuit components, the Ghost Immobiliser doesn't interfere with the factory settings of your vehicle.
It's also completely undetectable to thieves using diagnostic scanning devices. This is due to the fact that it doesn't transmit and receive radio frequency signals, and it uses the CAN data to communicate with your ECU. Furthermore, it doesn't require any modifications to your vehicle's existing key fobs.
Enter your sequence for disarming (either two or one button) and then turn on the ignition of your vehicle to activate Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. You can now start your vehicle and drive in a safe manner.
Once installed, Ghost Immobiliser protects your car against hacking or key cloning, while preserving its value. In Transport Mode you can temporarily disable the Ghost Immobiliser when you need to hand your vehicle to service or valet park.
You'll require a continuous power source (12V) and a grounding source to complete the installation of the Ghost immobiliser. Ensure that these are both well-insulated and safe to touch. It's also recommended to use cable ties to tie and secure the wires. This will reduce the risk of tampering by potential thieves. Be sure to double-check the location of these points to avoid making mistakes, and mark them with a piece of tape or label. Examine all connections for signs they're wearing out. Make sure all connections are in place, and properly protected. Don't forget to test your Ghost Immobiliser after the installation is completed. This will ensure that the unit functions properly and that all connections and insulation are safe. Be sure to correct any issues as soon as they arise.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that connects seamlessly with your vehicle's ECU in order to prevent unauthorised motor starting. Its innovative technology protects your vehicle from hacking, key cloning, and other methods that thieves employ to steal vehicles. The Ghost also works in conjunction with existing alarm and tracking systems to provide the ultimate vehicle protection. The Ghost's unparalleled features, coupled with its discreet design makes it a preferred option for both drivers who love cars and security-conscious drivers.
To ensure the proper integration of the Ghost Immobiliser, it's important to follow every step of the installation process. Check the wiring diagram for the vehicle to help you locate and connect the wires. You'll need to determine the power and grounding sources. Once you've found them you'll have to mark them in a way that they are easy to locate when installing. It is also essential to use high-quality tools and materials. Basic hand tools can help with making precise connections, while a multimeter will verify electrical values and ensure security. Insulation tape and cable ties can help keep connections tidy and neat. Also, a user's guide will provide specific instructions tailored to your Ghost model.
Before you begin installing it is important to test the system by entering the PIN code and then starting the vehicle. This step will confirm that the immobiliser functions according to plan, and prevents unauthorised vehicle starts. This procedure should be carried out regularly as part your regular vehicle inspections in order to ensure that the system is working properly.
After the installation is completed, you are now able to start driving your vehicle with confidence. The Ghost will protect your vehicle from would-be car thieves. It will ensure that no one will take your car away even if they don't have the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that identifies any attempts to steal or tamper with. This allows you to track your car in the event that it's stolen.
The Ghost is compatible with a range of vehicles, including those made by all major manufacturers. Monty's Locksmith can help you secure your vehicle using this cutting-edge device. Contact us today to find out more about our services and installation options. We are a TASSA Registered installer which guarantees that we adhere to the strictest standards and procedures for installing our products. This assures insurance companies, customers and law enforcement agencies that all installations are performed safely and correctly.